Introduction

In this guide you will learn to take apart the keyboard to gain access to debris under the keys that could be causing sticky keys.

  1. lvAioJBT4V3Sox4i
    • Use a JIS #00 screwdriver to remove all back panel screws.

  2. FtR31VqG1XaS6WSV
    FtR31VqG1XaS6WSV
    QgtZCEa56WJeKfOW
    • Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

  3. eL15cQBgQbtb1sPv
    • Lift off the rubber membrane.

    • When replacing, make sure the back stubs align with the back of each key on the keyboard.

  4. DaVHIb2ylOOSV55P
    • Use a screwdriver to remove the screws securing the plastic backing on the keys.

  5. hpiUYFIJtA1Aa2kQ
    • You can use the spudger to press out specific keys that are dirty or for key cap replacement

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Medeiros

Member since: 20/03/24

253 Reputation

0 comments