Spy Gear Video Walkie Talkies Top Cover Replacement

Written By: Adam Kinnett
  • Comments: 0
Spy Gear Video Walkie Talkies Top Cover Replacement

Difficulty

Moderate

Steps

5

Time Required

8 minutes

Introduction

  1. aqqr1oMtuFfMTjUC

    • Remove the battery cover by removing the P1 Philips screw.

    • Remove the 3 AA batteries by hand.

  2. RngB5VdRIKOdYe41

    • Unscrew Top Cover with a 3mm Triangle driver bit from the Driver Kit.

  3. LRUsMefVVydyWrUK

    • Use Opening Tool to release barbed latch on top cover.

  4. IyWEFrty5TQnfcaB

    • Release pilot studs near the hinge with Metal Spudger.

  5. gvympCqs6ZMkIw5O

    • Once the Top Cover is free, you will have full access to the circuitry.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam Kinnett

Member since: 16/02/16

121 Reputation

0 comments