Introduction

  1. BNYt1MRVRiUCRUAf
    BNYt1MRVRiUCRUAf
    lfOdFy4AHGDqaWH5
    SV3TWss5IcrTwToE
    • Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.

    • Insert plastic opening tool in the corner of device and slide along edges to separate adhesive.

    • Remove cover

    • Disconnect battery, to avoid electric shock, by pulling up on the white plastic as shown by the orange box.

  2. xjCjwQ4eDCShQ3Gd
    • Locate the volume module.

    • Remove both screws using the Philips screwdriver.

  3. DvrWvbi1GKRLABgK
    • Once both screws are removed grab the tweezers.

    • Then lift up on the module.

  4. bqYs2UZFFpIFiU5d
    • Find the electrical tape connecting the module to the motherboard

    • Carefully pull out the electrical tape horizontally and remove the volume module from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Martin Luna

Member since: 25/09/14

1873 Reputation

0 comments