Sony Reader Touch Edition PRS-600 Back Cover Replacement

Written By: Terrika Ngobili
  • Comments: 0
Sony Reader Touch Edition PRS-600 Back Cover Replacement

Difficulty

Very easy

Steps

3

Time Required

No estimate

Introduction

  1. PGLNjjucXYH6e4uD

    • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

  2. UJepYfSQa4GDsp5i

    • Slide the back cover off by pushing it to the left, away from the side that held the screws.

    • Remove the cover.

  3. kqOFIHW2gWDXIeJv

    • This is what the device should look like once the back cover panel has been removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Terrika Ngobili

Member since: 13/10/14

857 Reputation

0 comments