Introduction

This guide will explain how to take off the ear cups on the H.ear On 2 headphones. These steps can be applied to both the right and left side of the headphones. This guide is relatively easy and is necessary to complete other guides.

  1. 4XCvYhjfDlcr3Ary
    4XCvYhjfDlcr3Ary
    yJ3MVc4QdeJ4YKAI
    • Start by inserting the iFixit plastic opening tool in the crease between the hard plastic and the ear cup, and then gently apply pressure until it separates. You may need to repeat the process on back until it is completely separate.

    • This may take a considerable amount of pressure, but do not force it.

  2. OATcGBXMfuHK1lWL
    OATcGBXMfuHK1lWL
    GUACGQmyRBlRa5QG
    • Use the JIS #00 Screwdriver to remove the five 6.4 mm screws holding the back plastic cover in place.

    • Then, turn the ear cup over and carefully lift the plastic cap off to reveal the internal components of the left ear cup.

    • This same process can be repeated on the right ear cup as well. Be aware the right cup is connected to the rest of the headphones via ribbon cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alec Saffer

Member since: 15/04/19

549 Reputation

0 comments