Sony DVP-NS325 Outer Case Replacement

Written By: isaiah davila
  • Comments: 0
Sony DVP-NS325 Outer Case Replacement

Difficulty

Easy

Steps

3

Time Required

2 - 5 minutes

Introduction

The removal of the outer case of the Sony DVP-NS325 is necessary to gain access to the motherboard and other components. Without removing this piece you will not be able to replace/repair any parts in the next 4 guides.

For this guide, you will need a Phillips screw driver to remove the outer case.

  1. iNKnRhQwmm5U3xyU
    iNKnRhQwmm5U3xyU
    gYIUODX2rqitdq1e
    tVX2knh6Jr4JAbbh

    • Use a Phillips screwdriver to unscrew the five screws.

  2. qtucIPw1pJyMJP5q
    qtucIPw1pJyMJP5q
    Ia5V4PwuNjqtKAga
    Zvl3RBLDUFsAt5tP

    • Use the Philips screwdriver to remove the screws located on the sides and the back.

    • Not shown are the right side screw and the middle screw.

  3. TMDEQ3Iyru1fWT1v

    • Use a spudger to separate the case from the chassis.

    • Remove the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

isaiah davila

Member since: 14/09/23

469 Reputation

0 comments