Sony Bloggie 3D Player Battery Replacement

Written By: Timothy Tran
  • Comments: 1
Sony Bloggie 3D Player Battery Replacement

Difficulty

Easy

Steps

5

Time Required

10 minutes

Introduction

Every battery runs out of power eventually after many uses. This guide will show you how to easily replace the battery on your Sonly Bloggie 3D.

  1. PXLMLleXxqZZEtd1

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

  2. 3OJrcdiOlUX1RUf1
    3OJrcdiOlUX1RUf1
    dboLtCheqDEWPqo1

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

  3. 6ZbSqBtjEdGAwCGa
    6ZbSqBtjEdGAwCGa
    L3QfXBAim2xFthVx

    • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

  4. vbWgyuWRhuUMddoM
    vbWgyuWRhuUMddoM
    IEi3VElAZHWiJlXS

    • Use a plastic opening tool to loosen the back cover off the device.

    • Once the back cover is loose, remove it gently by hand.

  5. KjYlHm3ZABlOpXiw
    KjYlHm3ZABlOpXiw
    mOo6lGmopvFWexdW

    • Remove the battery with your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Timothy Tran

Member since: 30/01/13

1 Reputation

One comment

You forgot to mention the need to flip the screen up (a screw holds it down) in order to get to a screw holding the back cover. Other than that, thank you for the info.

Rich Brewer -