Sonos Roam End Caps Replacement

Written By: Kristen Gismondi

Comments: 1

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Tools

Metal Spudger

Step 1

Power off your Sonos Roam before beginning disassembly.
Use the metal spudger to pry the end cap with the buttons.
Pry from all sides to loosen the adhesive.
Use the iOpener, a blowdryer, or a similar heating device to loosen the adhesive if having difficulty.

What about IP67 rating? Am I going to lose the water resistance rating if I do not reapply some glue or additional adhesive when reassembling things back?

Askar -

Step 2

Flip the device to the other end cap.
Use the metal spudger to loosen the adhesive.
Use the iOpener, a blowdryer, or a similar heating device to loosen the adhesive if having difficulty.