Smart Parts Ion Separate Body From Grip Frame

Written By: Shane Villalpando
  • Comments: 0
Smart Parts Ion Separate Body From Grip Frame

Difficulty

Easy

Steps

4

Time Required

5 - 10 minutes

Introduction

  1. 5UFUcDGIeBEaYuiS
    5UFUcDGIeBEaYuiS
    j2DB5WGyMqVqvHNH
    ltRUImORBZpUKylY

    • Remove the front and rear 1" screws on the gun's grip frame using a 3/32" Allen Wrench.

  2. wOqw2NQuYZ1KnEOD
    wOqw2NQuYZ1KnEOD
    NA3IaBoS2HryMMvR

    • Remove the 12 mm screw on the top of the grip frame using a 3/32" Allen wrench.

  3. gdUshjO6nBSVqcGg

    • Separate the gun's body from the frame by gently pulling them in opposite directions.

  4. bCWXslpjBxVtyRup

    • Remove the 1-1/4" screw that's attached to the blue tube above the front grip using a 3/32" Allen Wrench.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Shane Villalpando

Member since: 02/02/15

1031 Reputation

0 comments