Introduction

  1. eJ1lrZpKTLBVYTMX
    • Turn the gun on by pressing the power button until the red light blinks.

    • Turn vision mode off by pressing the power button again.

    • Red light should be flashing in a double blink sequence.

  2. dJckMAwXoMvOuN6E
    • Pull the trigger to release the air in the gun.

    • Pressurized air can be forceful, causing particles to be ejected from the gun into your eyes and/or skin. When air bubbles enter the bloodstream, they can block blood vessels, causing embolisms. To avoid this, make sure to point the gun in a safe direction when pulling the trigger because air will be released from the gun.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Shane Villalpando

Member since: 02/02/15

1031 Reputation

0 comments