Introduction
This step by step guide will help you remove the battery from its compartment. The battery can be easily removed in 4 steps, with very few tools. Care should be used when handling the battery.
Tools
-
-
Locate and remove the 7.5mm Philips screw holding the battery cover in place on bottom of the vacuum.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
12 comments
Removed the single screw but cover will not come off. What do you do?
Just tried it. The cover is a bit hard. Gold the vacuum at an angle and slightly push the notch on the cover with a flat screwdriver, it should come out.
Will it run on cord only
ligthelf -
NO. Requires batteries.