Shark ION Robot 750 Battery Replacement

Written By: Tuong Tran
  • Comments: 0
Shark ION Robot 750 Battery Replacement

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

If your Shark ION R750 is experiencing low battery life or charging issues, it may be due to battery damage or death, which requires a replacement.

The battery in a robot vacuum serves as the power source for its operation. Damage or malfunction in the battery can occur due to factors such as overcharging, exposure to extreme temperatures, serious crash, or age.

Continuing to operate a damaged battery can be hazardous, possibly leading to a heat reaction between the battery's lithium and oxygen or other dangerous malfunctions.

Before you start the replacement, please be sure to disconnect any power resources from the vacuum and make sure it is completely off.

  1. E43FmSUTwQl5LhHt

    • Make sure the device is completely powered off before working.

    • On the bottom of the vacuum, unscrew both sides of the vacuum cover using a Phillips screwdriver.

    • Gently lift and remove the cover.

  2. DISVKRcKJRPqpSE6
    DISVKRcKJRPqpSE6
    1GpFRXECfMRqFMYQ

    • Grip both of the battery pull tabs and lift the battery out.

    • Be careful when lifting the battery out because it is still connected to the motherboard.

  3. IVkvohmDbIrOkcKR
    IVkvohmDbIrOkcKR
    onipxJHaZ25xHu1Z

    • To disconnect the battery, firmly squeeze down on the marked tabs, then pull the connector out of the socket.

Author

Tuong Tran

Member since: 13/09/23

196 Reputation

0 comments