SanDisk Sansa C250 Rear Case Cover Replacement

Written By: Nicolas Coffey
  • Comments: 0
SanDisk Sansa C250 Rear Case Cover Replacement

Difficulty

Easy

Steps

9

Time Required

No estimate

Introduction

  1. 2gE4OmVbUQCKbFTB

    • Slide the back cover forward toward the top of the device with your thumb.

  2. ekTOBGCTROU6bH4f

    • The back cover is now separated from the device.

  3. DnimKdVjUVCxF2fq

    • Apply a fingernail or a plastic opening tool to the base of the battery.

  4. RNTwrTNEjX1jRhtj

    • Lift up gently. The battery should come up and out.

  5. mVosGIbWAZlJYaNg

    • The battery is now removed from the device.

  6. iar1LN5oh1GomjIE

    • Remove the two black .265" screws at the base of the device.

  7. ZRQAZk1mGKJx1nH2

    • Using a plastic opening tool, pry up the two arms of the case cover near the middle of the device to free them from the sides.

  8. X6mMn3kxIIWowDI3

    • Slide the rear case cover toward the top of the device with your thumb to release it.

  9. 3rxPlcHM3ULXjaaX

    • The rear case cover can now be separated from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nicolas Coffey

Member since: 27/01/12

43 Reputation

0 comments