Samsung RF263BEAESR Freezer Door Handle Replacement

Written By: Al Sadeqe
  • Comments: 7
Samsung RF263BEAESR Freezer Door Handle Replacement

Difficulty

Moderate

Steps

5

Time Required

10 - 15 minutes

Introduction

This guide will show how you to replace a Samsung RF263BEAESR freezer door handle. Before you start working on the refrigerator make sure to unplug it. You will need a screw driver and an Alan key to complete this guide. Some of the steps might seem hard for example in step 2 and 3, you will need to screw in the screw on the door handle. You will need to make sure the screw is set perfectly for it to go in. I have made the steps as easy as possible which will help people save a lot of time.

  1. SYjYQx3faI6e4nmw
    SYjYQx3faI6e4nmw
    eawKbKLIH5BCZMlk
    H6JRY2dOnecuJIM2

    • Use the screwdriver to screw in the door handle opening.

  2. ByAoeLSnbSvF2qDI
    ByAoeLSnbSvF2qDI
    YvomqeNvbBL2sClA
    YCwRbDIafPaxRhIo

    • Add the screw on the other side of the handle.

  3. MeFaUUsNtF41XtJT
    MeFaUUsNtF41XtJT
    qdUGmCtqMEQUqgry
    MN2aD4bnJLOM1UFd

    • Use the screw driver to screw in the mounting screw on both sides of the freezer.

  4. DBRRpjYUmREScSvE
    DBRRpjYUmREScSvE
    bxItIh33ACVNWP4a
    n4HWsoDNdpPP5taC

    • Use the Allen key to screw in the small bolt on the bottom right side of the handle.

  5. dX42vOgtjRsIuoFo
    dX42vOgtjRsIuoFo
    Oh2byj5IvIvE5rEM
    5gjuGKSNOOnQiTVg

    • If all done correctly, you will have a functioning door handle.

    My mounting groove is what is broken

    becky burns -

Author

Al Sadeqe

Member since: 30/10/22

142 Reputation

6 comments

The plastic piece that you screw the mounting screw into is broken on our refrigerator. How can I open up the door to replace that plastic piece? Thanks.

Kevin Bosch -

Hi Kevin, were you able to fix the plastic piece. I also have a similar issue where the plastic broke off

Aneesh Nair -

Any leads on where to buy the plastic part?

Mariola -

4mm is too big, I had to use a 2.5 instead.

Smed -

According to Samsung, that 'plastic piece', also known as the Freezer Door Handle Mounting Cap, (the part that the handle mounting stud is attached through), has no part number... "There are not part numbers assigned to these parts as this model doesn’t allow the replacement of them". The only part option Samsung offers is the Freezer Door Assembly, currently about $350 plus Sales Tax and Shipping.

Once your Samsung appliance gets to be more than 2 or 3 years old, Samsung simply has horrible customer support and unreliable parts support for it's products.

Paul Flam -

Instructions for 3D printing and installing the plastic part (mine hasn't completely broken but am saving this... hope it helps someone else!): https://www.thingiverse.com/thing:459524...

Margaret Michael -