Samsung NX Mini Front Case Replacement

Written By: Kelsea Weber
  • Comments: 2
Samsung NX Mini Front Case Replacement

Difficulty

Moderate

Steps

9

Time Required

No estimate

Introduction

Use this guide to replace a damaged front case or open the case to access other components of your camera.

  1. psgCIinb2HQMroHV
    psgCIinb2HQMroHV
    6yv6OFRTRWGjJuDq
    LZkXwqCYcOK1XgtX

    • Orient the camera so the button panel and LCD are facing you.

    • Use a spudger or fingernail to open the battery compartment on the right side of the camera.

  2. NOJqRWLyWWHfIedp
    NOJqRWLyWWHfIedp
    PGw5WQLbd5UsU1ZT

    • Push the blue trapdoor to the left to release the battery, and remove the battery.

    • There is no battery shown in this photo.

    my battery is stuck, is there a manual release button or a way to remove the battery safely?

    beat70 -

  3. usF2HdXjipSkAu65

    • Use a Phillips #00 screwdriver to remove the 4 mm screw inside the battery compartment.

  4. FBhJCXxOCVoKTGgA

    • Remove the 4 mm Phillips #00 screw hiding in the external flash port.

    You don't show us how to remove the top plate

    Bev Curran -

  5. RQypSEK2pdXYyDFf

    • Remove the four 5 mm Phillips #00 screws from the lens assembly.

  6. 52UiRHqVkOYpBNq3

    • Remove the metal lens mount by hand or with tweezers.

    • Be careful not to touch the sensor in the center of the lens assembly.

  7. fuT3A4bYWYT26OFe

    • Use tweezers to remove the inner metal ring.

  8. n3eyKKDHKE1x6WVH

    • Use a Phillips #00 screwdriver to remove the three 4 mm screws from the bottom of the case.

  9. lhXCW5uEdZpJbVWT
    lhXCW5uEdZpJbVWT
    HYEglwV2lN5kAHBD

    • Use your hands to slowly pull the front casing away from the camera.

    • The case is attached with multiple clips that may make a cracking noise as you pull it away from the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kelsea Weber

Member since: 12/11/15

20191 Reputation

0 comments