Introduction

This guide will help you to replace the power button of your Samsung ML2510 laser printer.

  1. AMciVB3XetABhW11
    AMciVB3XetABhW11
    JwE2ZLpVsyvDQ6Mp
    IJVwQZDGsLqb3xok
    • Remove the top hinged panel by taking out the pins at the bottom of this panel.

  2. JmUfmbvf11lfOByC
    • Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

  3. NLXCK3NIUMh1nDrI
    NLXCK3NIUMh1nDrI
    soh2vPweOh6p4xk1
    ZU1asE44wP5uGAH4
    • Gently lift the top panel while simultaneously pulling off the back panel.

    • Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

  4. jlTRoW4DnIeHpxQF
    jlTRoW4DnIeHpxQF
    Xht1w5OHsvCcJZsB
    pYC5Jn4AFDYwSfvd
    • Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body.

  5. AMWEd4X2nprQs1Ty
    • Using a Phillips #2 screwdriver, remove both 1" screws on the front face of the printer.

  6. GjaERHPVEJsQLFdP
    GjaERHPVEJsQLFdP
    VhqPp4HUQCHZZtMn
    PhcNgxD5dOZpKUQc
    • Using a plastic opening tool, gently lift one side of the top panel from its peg.

    • Repeat the last step to free the opposite side of the top panel.

    • Lift the top panel from the front to remove it entirely.

    • Turn over the top panel to reveal the button on the underside of the panel.

  7. nAMWRMuPklNokTy1
    • Using a Phillips #2 screwdriver, remove both 1" screws that secure the button to the underside of the top panel.

  8. Ubmw1nEDKiSFH6us
    Ubmw1nEDKiSFH6us
    ArHZ1oJhkBMCjNjB
    • Remove the clear plastic piece and the orange button from the panel.

    • Remove the orange button and the spring from the clear plastic holder.

    • Replace the button and reassemble the printer following the directions in reverse order.

bbaustin

Member since: 12/10/11

268 Reputation

0 comments