Introduction

This guide will show you how to replace the front-facing camera on this device. As with the back-facing camera, this replacement will require most of the phone to be taken apart beforehand.

  1. FM3fjMeaOyLGlyPd
    FM3fjMeaOyLGlyPd
    OLLZPiMmtZUmoFHA
    WNVDZBZbkOZWDxUd
    • Remove the back casing of the phone using the notch located at the top.

    Attention! This is under no circumstances a moderate repair!!! Most likely you'll break the LCD trying to it from the frame.

    Nothing is moderate difficulty with this phone except replacing the battery.

    If your screen/LCD is already damaged than it's easy because you don't care about it anymore.

    The part itself is around $200. You've warned!

    Marius -

  2. Idjclw6X6xgtDJZH
    Idjclw6X6xgtDJZH
    SS2CjxKG5dEZV2cF
    Vef6kx1VilN2GDDp
    • Lift up the battery using a plastic spudger or fingernail.

    • Damaging the battery may result in physical injury and/or damage to the phone.

  3. oZFDVVi3LXOwtZwq
    oZFDVVi3LXOwtZwq
    TcBd6xJQpwsOBvwW
    ClVhbac5JcKoZZ4E
    • Using a plastic opening tool or spudger, pry up the screen after the adhesive has melted.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

    • Because it is a water-resistant phone, the screen cannot be taken apart without breaking.

  4. MpHvLgL6CAUS3whY
    MpHvLgL6CAUS3whY
    htWcLZpOpLpwuJvM
    • The plastic cover of the phone may separate from the LCD screen. If so, also remove the LCD screen with the regular nylon spudger.

    • In the upper right area of the LCD screen, there is a connecting ribbon. Be careful not to rip its connection to the motherboard.

    • Do not hold the phone too close to your face or eyes. Small glass shards may dislodge or the metal spudger may slip.

  5. TeeUOlkUXdZWufxI
    TeeUOlkUXdZWufxI
    PtGpPjL3OVTQ4wmM
    cZpMmKGbqCvQIBrl
    • Remove the screws around the plate

  6. IHMCFnJjUd1AS1v3
    IHMCFnJjUd1AS1v3
    t3cCXO6TtLgGwRSe
    McN1jKyhRQZHIWEh
    • Push the plate out by applying pressure to the battery cavity.

  7. KPvsAjsbA3m5aHn6
    KPvsAjsbA3m5aHn6
    WWViFkgYQj63XNUL
    rghD5oo2OCkVUnwv
    • Remove the camera from the plug at the top of the phone with tweezers. It should pop out fairly easily.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caroline Janiszewski

Member since: 24/02/16

528 Reputation

0 comments