Samsung Galaxy S22 Screen Replacement

Using a heat gun, heat the device to 174°F (78°C). Make sure to heat the back side too

Apply isopropyl alcohol to the edges of the plastic card

Slowly slide the plastic card around all around the device. Make sure to slide through all of the adhesives while applying small amounts of pressure to pry the glass off

Unscrew the 6 screws holding down the wireless charging bracket

Carefully remove the bracket without tearing the wireless charging pad

Next, disconnect the wireless charger

Disconnect the battery and all of the highlighted flex cables

Remove the 7 screws holding down the plate containing the loudspeaker

Remove the plate

Remove the SIM card tray

Remove the 3 screws holding down the charge port and remove it

Pry up the edge (mine was the left side) with the iSesimo. Fill the battery socket with alcohol, and slowly pry the battery and let it come out on its own

Remove the 3 screws and then the 2-5G antennas

Apply a small amount of heat, and remove the buttons