Samsung Galaxy Luna LCD display Replacement

Written By: xingyu chen
  • Comments: 2
Samsung Galaxy Luna LCD display Replacement

Difficulty

Moderate

Steps

5

Time Required

10 minutes

Introduction

Use this guide to replace your Samsung Luna LCD display.

  1. BVVqHZWIthuNRaLR

    • Attach a small suction cup to the lower half of the glass screen.

  2. KWxpqPbRnoEX4qw4

    • Apply pressure to the middle section of the screen while pulling up the lower edge by pivoting your wrist.

  3. eIQq3FfYnjOhfxVP

    • Once you've opened a large enough gap, insert a Spudger tool between the glass and the motherboard.

    • Slide the Spudger tool around the gap until the screen is completely separated from the motherboard.

    • The LCD is very fragile,be careful when sliding the spudger around the gap.

  4. 2E2PUXJSDRH6ma3u
    2E2PUXJSDRH6ma3u
    xD5LFejEqafQextK

    • Pull the rear panel up and away to completely separate it.

    • make sure the panel is completely detached from the phone frame before separating it.

  5. FC2pBKYV5PfFGKdy
    FC2pBKYV5PfFGKdy
    2kjgBaDrRVaF4XXq
    TsFFKoKkUoQ3pWXH

    • Place the spudger tool between the LCD and the glass screen.

    • Slide the spudger tool in between the screen and the display until both are completely separated from each other.

    • The LCD is very fragile, do not apply excessive force when prying the glass panel

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

xingyu chen

Member since: 14/02/18

266 Reputation

2 comments

Hola, cual es el numero de parte de la pantalla a reemplazar?

Luis A. Andueza -

It appears that OEM screens are no longer available for this phone. I was able to find this third party display assembly that looks like it would work, but I can’t attest to its functionality, so there would be a bit of risk involved for you. Hope that helps!

Austin Blakely -