Introduction

This guide will enable you to replace the screen in case of broken glass, failure to respond, etc. You will need a heat gun, Phillips #00 screwdriver, iFixit opening tool, and tweezers. Take care when using dangerous tools.

  1. SSZxcQtQi1QNnqWL
    • Turn the smartphone off by using the power button on the right-hand side.

  2. E3ACInHixkThOHCG
    • Turn the smartphone over so that the rear camera is face up.

  3. cXfVCc6bGRD3MQhH
    • Use your fingernail or a flat tool to lift the back cover.

  4. GyjtbBVJvHpb4ZfN
    GyjtbBVJvHpb4ZfN
    UUcdMPApTC5Wp4aV
    • Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled 'SAMSUNG'.

  5. Eq2PXntItESGPBVN
    • Use your fingernail or a flat tool to lift the battery out.

  6. ouQVMueURn4eMmfm
    ouQVMueURn4eMmfm
    j5Fj154XqYcqAvoA
    • Use the Phillips #00 screwdriver to remove the eight 4 mm screws from the midframe.

  7. xWBPaWObA1ulDH2a
    • Use a heat gun or hair dryer to loosen the adhesive between the midframe and the rest of the device.

    • Take care when using these heat tools.

  8. meffvlARFsFGGE22
    meffvlARFsFGGE22
    3gVKtfGK5GUVluQc
  9. lji4gdxoI61pHA2w
    lji4gdxoI61pHA2w
    EtGkBPbvCOE3ZsGN
    • Use tweezers to disconnect the power ribbon from the motherboard.

  10. 4PkFqEdOOnoNHu6q
    4PkFqEdOOnoNHu6q
    SCkEDCjF1pixeFkN
    • Use tweezers or your hand to remove the audiojack.

  11. JX4YHWmRieLyVjq6
  12. k6tBVXiXLf4hvkWq
    • Lift the plastic panel that separates the digitizer and the motherboard with an iFixit Opening Tool

  13. ngfnUhSVqfyCRpHM
    ngfnUhSVqfyCRpHM
    NfpPavIVvRLFPEAl
    tQxFkdyKFB6EqvSY
  14. SlBumRXJ3LHJ3TD2
    SlBumRXJ3LHJ3TD2
    XYdnOWZALhLVWsLP
    • Use tweezers to disconnect the digitizer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cody Coombs

Member since: 02/10/18

257 Reputation

One comment

What if the phone does not come back on after assembly

nfl.ny.la.313 -