Samsung DVD-P230 Power Cord Replacement

Written By: Evan Domingue
  • Comments: 2
Samsung DVD-P230 Power Cord Replacement

Difficulty

Easy

Steps

7

Time Required

2 minutes

Introduction

  1. ZCIsAV4WPXmgmktY
    ZCIsAV4WPXmgmktY
    HPbJZF5mxyn2TeBA
    ZsNRHDqcJkCs4YDX

    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    Very Super service!

    SzibeL -

  2. OhLfcEahRNRIDn51

    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

  3. 3Gm6fLxyZlhTGRNP

    • Unscrew the 3 screws in the back.

  4. SW5ITatQiYCsgODf
    SW5ITatQiYCsgODf
    KRBJbDRAqwIeyLvJ

    • Pull the outer case upward and then towards you.

  5. yhImEwi64cWAvTcX
    yhImEwi64cWAvTcX
    XmffFGKMgNpWmmsD
    uRVEc6MxPyseBgMR

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

  6. idZPysyJia43cHCw
    idZPysyJia43cHCw
    DYEE4F5JDaMnHKZu

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

  7. E3Hyp3mvyGRtjHX6
    E3Hyp3mvyGRtjHX6
    p1lmMGXefh2jgTfA
    eQVKoAbrnmpUEPBf

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Evan Domingue

Member since: 28/01/11

410 Reputation

One comment

where can I get a replacement cord?

Bill Cavanaugh -