Samsung DV300F Back LCD Screen Replacement

Written By: Timothy Gordon

Comments: 6

Samsung DV300F Back LCD Screen Replacement

Difficulty

Moderate

Steps

Time Required

5 minutes

Introduction

This guide will show how to remove the Back LCD Screen.

Tools

Phillips #0 Screwdriver

Step 1

Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.

Only one screw on bottom of camera

John Petralito - 14/04/21

Step 2

Remove the back case of the camera carefully.

The covers are attached with very small tabs around the cover perimeter. A very small blade screwdriver is helpful in prizing the covers apart and off.

JM Johnson - 23/08/19

Step 3

Remove the front case of the camera.
Remove the front LCD screen from the front case next to the lens.

Step 4

Remove the back LCD screen from its place carefully.

samsung es90 lcd Where to call the address

ianam73 73 - 06/03/19

I live in Bangladesh

ianam73 73 - 06/03/19

The white LCD is attached to the housing with sticky tape. Again a small blade screwdriver is helpful to CAREFULLY pry it out.

JM Johnson - 23/08/19

Where can i find a replacement lcd screen?

Jason Bills - 11/08/20

Step 5

Flip the black tab where the back LCD screen connects to the circuit board.
Pull the tape connection to disconnect the back LCD screen from the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Timothy Gordon

Member since: 23/03/15

820 Reputation