SONY Alpha NEX-3N Flash Assembly Replacement

Written By: Terrance
  • Comments: 0
SONY Alpha NEX-3N Flash Assembly Replacement

Difficulty

Difficult

Steps

10

Time Required

1 hour

Introduction

  1. bbmlHeqJ2AcAAfZC
    bbmlHeqJ2AcAAfZC
    uWuPnSoENURFjnXJ

    • Remove battery and card

  2. SFY2y4bIcFaEHkCg
    SFY2y4bIcFaEHkCg
    SprAdAZHqPXUxXSv
    GD34JjAKgADaMqeh

    • Right side, remove 1 M1.4x3.7 screw

    • Left side, remove 3 M1.4x3.7 screws

    • Bottom side, remove 5 M1.4x3.7 screws, including 2 in battery bay. 2 of them out of this photo, you can find them.

    • Do NOT touch screws on the bottom of LCD assembly.

  3. hGFMlxleZcJAGpBX

    • Pop the flash.

    • In flash room, remove 1 (one) M1.4x3.8 black screw.

  4. HkZhyWqijQoj4UNY
    HkZhyWqijQoj4UNY
    ebJLVB6oYdVcDHsP
    jfANQmLymrxIClEK

    • Remove LCD hinge cover, by sliding to the left.

    • Remove back cover, actually just a plastic frame.

  5. AXLdgtqhOpu4t5IZ
    AXLdgtqhOpu4t5IZ
    piNTK5EGJveScKpr

    • Remove 1 M1.4x2 screw

    • Remove another M1.4x2 screw, sorry for the angle.

  6. rlBMAbDYPTWAuXAn
    rlBMAbDYPTWAuXAn
    hIKIndM2Aj5RR36l
    2BjKPxUyAh21lsMW

    • CAUTION. Sony makes world's MOST BRITTLE FPC!

    • Loosen LCD assemble with caution!

    • Release FPC cable, the connector is flip type.

  7. D4gxMAohfcFPUDlH

    • The LCD assembly

  8. AYpJ1QafgEIQXRmb

    • Remove 3 M1.4x3.6 black screws, 2 of them out of focus

  9. uUIFXLJExLQnu5Y6
    uUIFXLJExLQnu5Y6
    BdGiXTPBneMRsnFC

    • Slide the flash assembly backwards with caution.

    • Detach flash FPC by pulling it out of the socket.

    • High Voltage! Do NOT touch metal on FPC.

    • Then remove the flash assembly.

  10. LOTZCcXjgDpG4iHr

    • Remove that part whatever called, by sliding it backwards.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Terrance

Member since: 18/11/09

6416 Reputation

0 comments