Introduction

Some people may be intimidated to try to handle the weed wacker line initially, but after reading the guide you will see that it is completely safe and easy even for people without any experience repairing anything at all! Follow this guide if you need to replace the line on your 18v model P2006A Ryobi weed wacker.

  1. 22GgM3eOaruCMFwS
    22GgM3eOaruCMFwS
    blCMPUePisvNYQVv
    • Press the button and pull to remove the battery.

  2. f3H51gmmImihv1HH
    f3H51gmmImihv1HH
    ECF2nIBbGTuiDul2
    • Press the button and pull to remove the line cover.

  3. iw6JIAtP1bBpOslX
    iw6JIAtP1bBpOslX
    EL4omDI5TlQn5Md1
    • Take out the empty reel.

    • A non-empty reel is shown in the picture.

  4. XpInDMVV6JYVq151
    XpInDMVV6JYVq151
    ElpsseJcRhULHYbh
    • Untie and loosen the cord on the new reel.

  5. EujMdk3EAvCecIbZ
    EujMdk3EAvCecIbZ
    VZoJ5E45JoOfyZKs
    • Thread the replacement reel line into the hole and push the replacement reel in.

  6. vhuXIi1hhUKsx42e
    • Put the cover back on.

  7. L4cTfFiJSICZmgJP
    • Push the lever to allow yourself to pull 3-4 inches of line out.

  8. oT6Z2mCiQhqeeHya
    oT6Z2mCiQhqeeHya
    6vSfVYXxVJS3EAVF
    • Put the battery back in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Hockman

Member since: 23/07/20

157 Reputation

0 comments