Introduction
Need to replace those rubber cushions and washers on the trucks of your classic roller skates? No problem. The only tool required is a 14 mm wrench or ratchet and socket. Replacement cushions and washers are available online or at any respectable skate shop.
Tools
Parts
-
-
Once the bolt is no longer in the base plate, lift and twist the entire truck assembly from the skate.
-
-
-
Remove the retaining washer from each cushion.
-
Use a spudger if the washer and cushion are difficult to separate.
-
Replace worn cushions and washers.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
