Introduction

This guide will show you how to remove the laptop RAM.

  1. s1dfTSQGEejAXhME
    s1dfTSQGEejAXhME
    kJYiUPdFLtTXKVyq
    • Place the laptop on a fat surface with the underside facing up

    • Remove the 4 Philips head screws.

    • Turn the computer over and open the display

    • Grasping each side of the palm rest, gently lift it off and rotate toward the front of the laptop

    • The palm rest will be connected to the main board by a ribbon cable

  2. W136rrqMHODYlggK
    • Disconnect the touchpad ribbon cable

    • This step is recommended in the service manual however it is possible to remove the RAM without discoinnecting the touchpad cable

  3. LwASrNR1RUl5Hvpl
    • Locate the RAM modules

    • Gently press the metal tabs outwards to release the top RAM module and remove it from the laptop

    • With the top RAM module removed you can release the lower RAM module in the same manner.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Glac1er

Member since: 26/05/13

180 Reputation

0 comments