Razer Blade RZ09-0130 2015 Back Panel Replacement

Written By: Carson Kellerman
  • Comments: 0
Razer Blade RZ09-0130 2015 Back Panel Replacement

Difficulty

Easy

Steps

2

Time Required

2 minutes

Introduction

If your Razer Blade RZ09-0130 2015 back panel is damaged and needs replacement or you need access to the laptop’s circuitry, please follow this guide. This is a crucial step if you want to replace any other component within the laptop. A T5 Torx screwdriver is the only tool required for this procedure. Do not attempt to pry off the back panel with another object as it should come off with little resistance.

  1. urbQ1qLdpYxoh3JI
    urbQ1qLdpYxoh3JI
    ImZGv1TPXFYE5JyE

    • Be sure to power off the device before beginning.

    • Use a Torx T5 screwdriver to remove the ten 3 mm screws along the edge of the back panel.

  2. VGXp115nUIwhLmPb
    VGXp115nUIwhLmPb
    fc31OnBDw1ga4Jgn

    • Remove the back panel from the laptop by sliding it away from the hinge.

    • This device is missing the battery. Make sure to detach the battery connector before proceeding with laptop repairs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carson Kellerman

Member since: 29/01/20

495 Reputation

0 comments