Introduction

Over time, laptop batteries degrade and sometimes swell, leading to shorter usage times between charges and safety risks. Fortunately, swapping to a new battery can always fix the issue. You will need a Philips #1 screwdriver, a Torx #5 screwdriver, an opening pick, and one new Razer Blade Pro 17 Battery for model 2019.

After completing this replacement, your laptop will have increased battery life.

  1. btWqU3sXmGTV5mic
    btWqU3sXmGTV5mic
    rdStQjeT2ZLEk4BG
    • Unplug the laptop.

    • Press and hold the power button to shut down the laptop.

  2. XEZkZxsM5kKOtfPr
    XEZkZxsM5kKOtfPr
    ARJZfFGOjAkHK5oY
    UuT6W44QDJWaKBWd
    • Remove the 12 screws that secure the lower case with a T5 Torx screwdriver.

  3. 4M2N1ueqXhXcKjSH
    4M2N1ueqXhXcKjSH
    YshEPLXKd6d3v3Mg
    gQW5NsWZH52ICftT
    • Insert the opening picks into the gap between the back plate and the body of the laptop and pry around the perimeter until the lower case releases.

    • It is easier to use the gap at the ethernet port.

    • Lift up and remove the lower case.

    • Be careful not to place anything on the back to avoid scratching any components.

  4. AQ1LisJdjGGH6f1A
    AQ1LisJdjGGH6f1A
    OfQmL4RaAsMmReOe
    GkAwLWPiVZZe4Gid
    • Remove the black sticker on the fan assembly.

  5. l15nW1uycC2PoNGj
    l15nW1uycC2PoNGj
    OdYQGXNCKiGDs6ng
    • Use your fingernails to gently "walk" the battery connector directly out of its port.

    • Do not pull directly on the wires, as depicted in the photo.

  6. xQI5oAbvcqxPKUwR
    xQI5oAbvcqxPKUwR
    IUGgowYqk4ukMsTx
    • Use your fingernails or a spudger to gently lever the fan connector directly out of its socket.

    • Do not pull directly on the wires, as show in the photos.

  7. 1NS3AwHN1sVcPWGp
    1NS3AwHN1sVcPWGp
    OSBhCclagYKFfe5u
    EgNF4psiJV4mEBs5
    • Use a Phillips #1 screwdriver to remove the 10 screws that secure the battery and fan assembly.

  8. qQnenSwQyEoVRrfy
    qQnenSwQyEoVRrfy
    gIP6XGMo5ddNZeRr
    IqFbsKkFfmkrEZpB
    • Lift the fan assembly and battery out of the chassis.

Conclusion

For optimal performance, calibrate your newly installed battery after completing this guide.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.

Nate

Member since: 15/04/24

157 Reputation

0 comments