Introduction

This guide will assist with the switch replacement for the ROYALAXE R68 TKL Mechanical Keyboard.

This keyboard has a Hot-swappable design. This enables super convenient pullout and pop-in of the switches. Replacing the key switches does not require significant prior knowledge; you can do this with the tools provided with this keyboard. Therefore, it is rated as "easy."

  1. XuBViPtMtaGKRWOe
    XuBViPtMtaGKRWOe
    q6pRqcYvT3jMHXys
    • Unplug the keyboard from its power source.

  2. TVSPbChPUFPADgYo
    • Remove all keycaps with the keycap puller.

    • You can line up the keycaps in order or take a picture of your keyboard to make it easier to put them back on at the end.

  3. HhNCIyiOMWNkQX5F
    HhNCIyiOMWNkQX5F
    ncmdZDPrHk5PkAK6
    • Clean the keyboard using a compressed air duster and a small brush or cotton swab.

    • You can also clean your keycaps by soaking them in a bowl with water and soap for about 30 minutes.

  4. XpcuWs1U1pDwMJTB
    XpcuWs1U1pDwMJTB
    IbdQyW4mHRBvOyGK
    • Remove the switches with the switch puller.

    • Make sure to clamp on the switch vertically instead of horizontally. Then gently pull it out.

    • Taking out the switch by pulling horizontally could damage the switch.

  5. 2YUTMs2EGUPwQ4Mk
    2YUTMs2EGUPwQ4Mk
    L6xMWKS6KF2ounHe
    TW3KEXudoCje3aXW
    • Make sure the copper part of the switch faces you when you try to insert the switch.

    • Insert the key switch as straight as possible and press down gently until you hear a click.

    • If you fail to line it up, it will bend the copper part under the switch. This will permanently damage the switch.

  6. TibYBhMRSxlIFPuq
    TibYBhMRSxlIFPuq
    q2QWtFKIIXPCowNK
    • Place keycaps in their respective position.

    • Make sure all keys are operating well.

    • Enjoy your new switches!

Angie

Member since: 25/10/23

163 Reputation

0 comments