RK5 PLUS VR Headset Headband Replacement

Written By: Faraaz Abdul

Comments: 0

RK5 PLUS VR Headset Headband Replacement

Difficulty

Very easy

Steps

Time Required

10 - 15 minutes

Introduction

Follow this comprehensive guide to repair a broken headband for your RK5 Plus Virtual Reality Glasses Case. The headband is an important component of your VR headset as it keeps the device securely on your head. Due to frequent use and the pressure exerted on it, the headband of this VR headset may become overstretched, snap or rip. This guide will show you how to replace the headband of your RK5 Plus Virtual Reality Glasses Case.

Tools

Velcro Straps

Step 1

Place the headset right side up and facing you on a flat surface.
Gently detach the velcro straps from the top, left, and right sides of the headset and set them aside.

Step 2

Remove the white headband adjustment part and carefully pull it off of the three straps.

Step 3

To access the straps that need to be replaced, remove the padding around the visual lenses of the headset.
To do this, use your hands to detach the plastic frame between the padding and the lenses.
If you need help getting started, use a spudger or opening tool and undo the clips holding the plastic frame.
Unhook the old straps from the sides of the headset.

Step 4

Reattach the new velcro straps to each of the white hooks.
Make sure the straps are securely attached to the hooks before moving on to the next step.

Step 5

Reattach the plastic frame with the padded back onto the headset.
Make sure the padding is properly aligned and clicked into place.

Step 6

Reattach the top band into the top hook of the headset.
Take the other sides of the velcro straps and hook them into the white headband adjustment part.
Check that the straps are properly aligned and securely attached to the headband adjustment part.