Quiksilver The Fifty50 Strap Replacement

Written By: Sue Giske
  • Comments: 1
Quiksilver The Fifty50 Strap Replacement

Difficulty

Moderate

Steps

2

Time Required

5 minutes

Introduction

This guide will teach someone how to replace a watch strap of the Quiksilver The Fifty50 sports watch. Watch strap damage could be from sports activity. Before getting started make sure to grab the tools necessary and at least skim the instructions once to understand what it will look like while you are replacing the watch strap, that way there will be no surprises as you go through the steps.

  1. CpFvqH1wKycYEY4m
    CpFvqH1wKycYEY4m
    JBZURFUgNBTaKFZs

    • Place the watch (face down) on a solid surface.

    • Carefully use the screwdriver and push in one side of the strap.

    • Slowly remove the strap by pushing back one of the hidden metallic holders for the strap.

    • If you are having difficulty trying to take off the strap, feel free to use a 3.5 flat head screw driver, or any kind of tool that make this step easier.

  2. rmjpUZZskQFZBIOx
    rmjpUZZskQFZBIOx
    A15SEGU4JQka1pDL

    • Gently pull the pin out of the strap.

    • Carefully handle the small metallic holder, as they are sharp and may be difficult to locate if lost.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sue Giske

Member since: 16/07/19

634 Reputation

One comment

what size band is replacement 22mm? 24?

Michael lee -