Quiksilver The Fifty50 Analog Battery Replacement

Written By: Sue Giske
  • Comments: 0
Quiksilver The Fifty50 Analog Battery Replacement

Difficulty

Moderate

Steps

7

Time Required

15 minutes

Introduction

If your Quiksilver The Fifty50 sports watch has not been turning on or seems to be having battery issues this guide will successfully teach someone how to remove the analog battery. Before getting started make sure to grab the tools necessary and at least skim the instructions once to understand what it will look like while you are replacing the battery, that way there will be no surprises as you go through the steps.

  1. CpFvqH1wKycYEY4m
    CpFvqH1wKycYEY4m
    JBZURFUgNBTaKFZs

    • Place the watch (face down) on a solid surface.

    • Carefully use the screwdriver and push in one side of the strap.

    • Slowly remove the strap by pushing back one of the hidden metallic holders for the strap.

    • If you are having difficulty trying to take off the strap, feel free to use a 3.5 flat head screw driver, or any kind of tool that make this step easier.

  2. rmjpUZZskQFZBIOx
    rmjpUZZskQFZBIOx
    A15SEGU4JQka1pDL

    • Gently pull the pin out of the strap.

    • Carefully handle the small metallic holder, as they are sharp and may be difficult to locate if lost.

  3. DGbxAJ5jk6xcs1Ka
    DGbxAJ5jk6xcs1Ka
    jtdXdQZkCdR5RMBx

    • Remove the four 1.1 mm screws holding the back panel in place using the Phillips #00 screwdriver.

  4. RdTSmYQSXXuEkQIo

    • Carefully separate the panel off of the watch.

    • Careful not to lose the four 1.1 mm screw or else the back panel will not be able to put back.

  5. mUXEwtMvKuMEY2Er
    mUXEwtMvKuMEY2Er
    KwIMjhE1m1NboVUX

    • Carefully lift the white plastic circular out of the watch.

  6. Ce1QhsrhrKERrW55
    Ce1QhsrhrKERrW55
    toko3wsYAhPUeKVK
    MMgKVnQx66VDJY4C

    • Remove the four 1.1 mm screws located on the metallic holder using the Phillips #00 screwdriver.

  7. esnFPx3px32iTbCm
    esnFPx3px32iTbCm
    JQaXZR64IoJTZ1e6
    Kr6cVixsl1BpSAKQ

    • Remove the large circular Analog battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sue Giske

Member since: 16/07/19

634 Reputation

0 comments