Introduction
Sometimes through typical wear and tear, your grill may not want to start right. If you live in an area where you don't use it year round after a period of time, it doesn't want to start correctly, It could be numerous things. This guide shows the most common isuses that could prevent a grill front starting or running properly, from the battery in the igniter to the propane hose and regulator.
Tools
Parts
-
-
Completely close the propane tank by turning the valve on the top clockwise. This prevents propane from leaking during the replacement.
-
Turn the knob on the hose counter clockwise to disconnect it from the tank.
-
-
-
Find the electric igniter on the grill and turn it counter clockwise to reveal one AA battery.
-
Replace the old battery with a new one.
-
-
-
Locate the orifice that connects the base of the grill and the hose to one another.
-
Conncected to the orifice should be a nut. Use the crescent wrench to turn the nut counter clockwise and remove the hose from the base.
-
-
-
Begin hand tightening the new hose to the nut that is connected to the orifice.
-
Once it has been adequately hand tightened use the crescent wrench to finish securing it to the orifice.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
I have a Napoleon travel series P285Q X. Do I need to purchase a control valve with a hose to convert from a 1 - 20 lb tank?
Question. Do I need to purchase a pressure valve and a hose to convert from a 1 lb to a 20 lb tank. The bbq is a Napoleon 285 pro series travel.