Polaroid a520 LCD Screen Replacement

Written By: Dani
  • Comments: 0
Polaroid a520 LCD Screen Replacement

Difficulty

Moderate

Steps

6

Time Required

5 minutes

Introduction

How to replace the LCD screen if it is broken or cracked.

  1. WYfIkmwZig5FRnNc
    WYfIkmwZig5FRnNc
    JNeEJKUcZRYypPgh

    • Place your thumb on the battery cover and push left towards the arrow.

    • The cover will release and pop open.

  2. DTcqwMe3NS6vRyS6

    • Remove the batteries from the camera.

  3. dyooU243Ipgvg1tY

    • Remove four 3 mm screws on the right side of the camera using a Phillips #1 screwdriver.

    • This will release the front and back casings.

  4. ulLGwnwPLXLgAGLR

    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

  5. Y1KvqUBR15mxIIyf

    • Under the screen, locate the black plastic strip that sits above the white plastic strip.

  6. iRcUrH5wTCnqJJnt

    • Pull both sides of the black piece upward-about a mm.

    • The black plastic piece is not meant to come all the way off, just enough to release the screen.

    • Once the piece is lifted carefully slide the screen out of the slot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dani

Member since: 24/06/10

21 Reputation

0 comments