Introduction
You will need to replace the flash cover if the camera will not take clear pictures, has a cracked or scratched cover. You will need to use the Shutter Switch Replacement guide as a precursor guide.
Tools
-
-
Unscrew the four 5mm screws on the top of the inside base piece.
-
Unscrew the two 5mm screws on the bottom of the inside base piece which is near the strap.
-
-
-
With force separate the front white piece from the back of the camera. You will use your hands to pull it apart.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
