Planet Eclipse Etha Battery and Grip Panels Replacement

Written By: Jared Olson
  • Comments: 0
Planet Eclipse Etha Battery and Grip Panels Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

Removing the grip panels allows you to change the battery and allows you to remove the frame, which gives access to more parts of the marker.

  1. 1JSogHlfG3SxSp2m
    1JSogHlfG3SxSp2m
    RSBS3APWrOFIJH4G

    • Use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

    • If you are only replacing the battery, skip the next step.

    • The screws in this guide are interchangeable with those shown in the Eyes replacement guide.

  2. MEh5fIhKYfEFBcgG

    • Flip the marker over and use the 5/64" hex key to remove the screw shown.

    • Remove the grip panel by gently holding the bottom of the panel and lifting the panel off.

  3. KWQVQTreo4ssb66O
    KWQVQTreo4ssb66O
    aFI3SbyaStbcV1N1

    • Carefully remove the 9V battery and connector.

    • Remove the 9V battery from the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jared Olson

Member since: 14/10/14

211 Reputation

0 comments