Introduction

This guide will show you the steps to remove the folding hinges at the bast of the headband.

  1. HPEfWZJn4UFMsKSc
    HPEfWZJn4UFMsKSc
    cxfm3WgPNMphbrfj
    • Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.

  2. WREcyAiiViIumORs
    WREcyAiiViIumORs
    g3GKEOVWQuEBUDX5
    • With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband.

    • With force, pull upwards.

  3. DUg26stbBPfdCBcq
    DUg26stbBPfdCBcq
    c4NPGbkv4BoGuLCx
    Bbhc2xanBubuxRXV
    • Remove the rail-piece that is now sticking up by pulling it up and out of the headphone.

    • Repeat on the opposite side and the headband will be released.

    • During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.

  4. Sy53XetqIFOKtblZ
    Sy53XetqIFOKtblZ
    YGtSdtWSYqilKiaS
    • While holding the base of the headband with one hand, hold the ear cup with the other hand.

    • Pull them apart to reveal the screw.

  5. qLRwIWid1dbuD5UK
    qLRwIWid1dbuD5UK
    DRF61NLoLflxIFWF
    • While apart, remove the screw from the headphone.

  6. ipQQMOlQ5GJlADCw
    ipQQMOlQ5GJlADCw
    umj4FFsQZXVLRq5Y
    • Loosen the plastic cover piece that protects the chrome folding hinge.

    • Remove the plastic cover piece.

    • During reassembly, make sure the plastic covering piece hooks onto the base of the chrome hinge before screwing it back in.

  7. EYpBLDiqs2LKNUdw
    EYpBLDiqs2LKNUdw
    15fvMNEFwQGdTTrm
    • Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge.

    • Repeat for the opposite side if necessary.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Garrett Leung

Member since: 17/04/13

955 Reputation

0 comments