Introduction

Use this guide to open up your speaker and remove and replace different components under the front panel.

  1. DqROGVTR3ndYnYQW
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Ar6k2scJSHm43Nie
    • Peel back the rubber feet from either side of the base.

  3. ATLgVcgFJoV5Pejy
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. SRZ6UCHTDa12TCDB
    • Separate the base of the speaker from the upper housing.

  5. PdZOMssvgUvJN3eu
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. UVYVvxpxUVrkIFKT
    UVYVvxpxUVrkIFKT
    O2KJcUa2GMICwngL
    xBUNPPyYuwigm5jH
    • Remove all cable connectors from the speaker motherboard.

    Emerson speaker Battery pack size

    Dion -

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Lennon

Member since: 14/04/15

10090 Reputation

0 comments