Panasonic LUMIX DMC-LX100 Battery Replacement

Written By: Olivia Hillman
  • Comments: 2
Panasonic LUMIX DMC-LX100 Battery Replacement

Difficulty

Very easy

Steps

3

Time Required

30 seconds

Introduction

Are you pressing the power button but your camera stays turned off? Replacing the battery is a quick fix that should solve this problem.

  1. BxPhxv5RcJCniZEC
    BxPhxv5RcJCniZEC
    24qG21PMoPF15qTP
    bFoIAGf2cKngBUWn

    • Looking at the bottom of the camera, slide the OPEN/LOCK switch to the left into the OPEN position.

    • The battery housing door should swing open.

  2. cBlsvJMuCeuhuPtd
    cBlsvJMuCeuhuPtd
    UbCCpay2LH1tquto

    • Flip the inside switch up to release the battery.

  3. nIDnaFMiZ3kI64Po

    • Grip the edge of the battery and pull it out.

    • Use a LUMIX Panasonic DMW-BLE9PP Battery Pack for replacement.

    How to take off the battery housing door? Is it necessary to take the front cover off in order to do it?

    Boser Hund -

    Hello, how to take the battery housing door off on lx100? Is taking the front cover off necessary? The whole tutorial is great but the most common part that breaks often is not covered.

    Boser Hund -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Olivia Hillman

Member since: 11/01/16

275 Reputation

0 comments