Palm Zire 21 Screen Replacement

Written By: Jeremy Craft
  • Comments: 0
Palm Zire 21 Screen Replacement

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

Use this guide to replace a screen on a Palm Zire 21

  1. mdfpDgGBVBXMHB2x
    mdfpDgGBVBXMHB2x
    wevt41nX4Pk1pcEV

    • Remove the two 0.8mm screws located on the back of the device.

  2. 1Fdt6FEUL3DkyaFu
    1Fdt6FEUL3DkyaFu
    oT2gLrZcUY25vEKK
    BAyG6mutOAy6LgaG

    •  Using tweezers, or something similar flip up the tab, releasing the wires located under the flap

  3. pntvZjUB51BPwIDs
    pntvZjUB51BPwIDs
    GgBFaYgOPOvwxQtn

    • Using a Philips head screwdriver, remove the two screws located at the bottom of the board.

  4. VYXNGDAVQ6f6a2Jc
    VYXNGDAVQ6f6a2Jc
    u6YStwxUXJNcXJ3O

    • Gently, remove the motherboard by lifting up exposing the screen.

  5. VGQ3xKsmwhMQSWmZ
    VGQ3xKsmwhMQSWmZ
    TgkXslRrEKWZufjs

    • Carefully, remove the screen from the device by lifting up and replacing with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jeremy Craft

Member since: 27/09/14

301 Reputation

0 comments