Olympus SZ-12 LCD Screen Replacement

Written By: Samuel Hays

Comments: 0

Difficulty

Moderate

Steps

Time Required

25 minutes

Introduction

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Tools

Step 1

Remove nine 4.45mm Phillips #000 screws from the outside of the case.

Step 2

There are four screws to take out on the bottom of the camera.

Step 3

There are three screws to take out on this side.

Step 4

There is one screw to take out on this side.

Step 5

There is one hidden screw inside the HDMI port.

Step 6

Using the blue plastic opening tool, wedge open and remove the case.

Step 7

Once you have the back case off, remove the LCD Screen.

Step 8

Using a plastic opening tool, gently lift the retaining flap on the display cable ZIF connector.
Pull the display cable from its socket on the motherboard.