Nostalgia Electrics PCM805 Extractor Head Replacement

Written By: Carlton
  • Comments: 11
Nostalgia Electrics PCM805 Extractor Head Replacement

Difficulty

Very easy

Steps

3

Time Required

1 minute

Introduction

Use this guide to replace your extractor head if it is damaged.

  1. uQkvRIAgdHsPFMsl

    • Make sure that the device is unplugged and has not been used recently because the extractor head and bowl can be very hot.

    • Place the device on a steady table.

    • Lift and remove the rim.

  2. yXUmDWXsE1dEqU1G
    yXUmDWXsE1dEqU1G
    CeQAH3JRwMGHLuhM
    LJfBhmCndsmMflxu

    • Twist the bowl clockwise until it is free of the groove and lift to remove.

  3. IKNrwTnFTAWVXFQ3
    IKNrwTnFTAWVXFQ3
    DCIBhxTIKLVaOxek

    • Firmly grip the extractor head and slowly lift vertically to remove from the device.

    I need the extractor piece for my machine. Can I get it

    sungiddess196626 -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carlton

Member since: 13/01/15

672 Reputation

10 comments

Where can I order a new owners Manuel.? My kids or the dog ate the one it came with. I didn't save the box either.

melissaroberts67 -

Where do I order a new extractor head?

melissaroberts67 -

Where do I order a new extractor head?

lianahanson -

Where do I get replacement extractor head?

lianahanson -

Did anyone ever find out where you can get extractor head?

Debbie Quintero -

Did anyone find where to buy an extractor head?

Angelina Collier -

Looking to buy extractor head … Any suggestions or link to buy?

c berberi -

Extractor head stuck. Cannot remove. Machine does not melt sugar.

Spent an hour trying to no avail. Great disappointment

Doris -

Where can I get an extracter head?? And the piece it sits on as the one I have someone put the bolt on wrong and stripped it??

Christina Schwertfeger -

Where can I get an extractor head ?

Yeminaliz Lorenzo -