Introduction

If you need to replace the back vent cover, use this guide to assist you. Additionally, this is a required step for disassembly to replace other parts on the unit.

  1. AHITOWTAgAAmI5JH
    • The back vent cover is directly above where the power cord protrudes.

  2. qTnFNgbn5nbi5WfB
    qTnFNgbn5nbi5WfB
    wJlVciBFaG5wD5hc
    • Use a Phillips #2 screwdriver to unscrew and remove four 1 cm screws from the panel.

  3. PVQw1gfiHrHoYPA1
    PVQw1gfiHrHoYPA1
    TVQEXHvnLnMLXFPe
    • Once unscrewed, remove all four screws in order to remove the back vent cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jaxon Tueller

Member since: 10/02/23

375 Reputation

0 comments