Nike SportWatch GPS LCD Screen Replacement

Written By: Zainab Hussein
  • Comments: 4
Nike SportWatch GPS LCD Screen Replacement

Difficulty

Moderate

Steps

7

Time Required

No estimate

Introduction

These step by step instructions will allow you to easily remove the LCD screen on the watch and replace it with a new one.

  1. M3yAZGRRvsfUsPXT

    • First, place the watch upside down so the back of the watch is exposed. Unscrew the six size #000 5 mm long screws located on the back panel using a size 000 Phillips head screwdriver.

  2. YFoVEgdkJW3tDpfd

    • Carefully separate the watch by pulling the band away from the main board.

  3. fa3N1L4wrPhJAnTu

    • Then, unscrew the two main board size #000 2.5 mm long screws using a size 000 Phillips head screwdriver.

  4. fBPEmurTHmfdSIkU

    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and is not removable.

  5. LwKoCRlTdYWN6LAJ

    • Use the blue plastic removal tool once again to carefully remove the screen.

  6. aMTghegdhhWSlOIN

    • Pull the plastic piece that is highlighted in the picture out from the back of the screen.

  7. cLDM4k6ZteiOeBxK

    • For reassembly, make sure the highlighted area in the picture, goes over the black plastic piece that was removed in the previous step.

    Hello,

    Thanks a lot for these informations. I would like to know how the LCD is maintained (glue, clip ???) Carine D

    Carine Daudu -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zainab Hussein

Member since: 27/10/15

222 Reputation

3 comments

Hello, I found your article very interesting, I was just wondering do you know where I can buy a replacement screen?

Thank you

Joseph Kermani -

hello do you know where I can find a replacement screen ?

Thank you

SMOUN -