Mr. Coffee DW13 O Ring Replacement

Written By: Madeline Landis

Comments: 2

Difficulty

Moderate

Steps

Time Required

25 minutes

Introduction

To complete this repair you will need pilers, a Philips head screwdriver, and a flathead screw driver. During this repair you will remove the base of the coffee machine, loosen the support bar, before finally removing the heating plate and prying out the O-ring.

Tools

Step 1

Before performing this repair, be sure that your machine is unplugged and dry and that your work space is clean.
Flip the Mr. Coffee DW13 over so that the lid is facing away from you and the base is facing toward you.

Step 2

Remove the eight 11 mm screws that secure the base of the machine with a Phillips Head #2 screwdriver.

Step 3

Gently lift the base cover to expose the inside of the coffee machine.

SO interesting! I love fixing things, myself. Many things are so

easy, if looked at logically, and/or long enough.

Nice site!

I don't have a clue how I came here to it.

haskinskristin43 - 10/06/17

Anyone know the Mr. Coffee part number for the white tubing? My Mr. Coffee maker model #BVMC-EVX23. Ty.

Pam -

Step 4

Remove the two 13mm screws securing the silver support bracket using a #2 Phillips head screwdriver.

Step 5

Gently lift the silver support bracket freeing the heating plate from the heating coil.

Step 6

Use needle-nose pilers to pinch and loosen the crimps

Step 7

Once the crimps are loosened, slide them down the tubing.

Step 8

Separate the tubing from the heating coil by grasping the tubing in one hand and the heating coil in the other and gently pulling apart.

Step 9

Place one of your hands on the front side of the heating plate.
Use this hand to gently push the heating plate towards yourself and out of the machine.