Mizuno GFE1251 Baseball Glove Lacing Replacement

Written By: Chandler Torres
  • Comments: 0
Mizuno GFE1251 Baseball Glove Lacing Replacement

Difficulty

Moderate

Steps

10

Time Required

40 minutes - 2 hours

Introduction

  1. 4rxhhPUewjP1gXcU

    • Untie the knot 1.

    • If you are having trouble, you can cut it with scissors.

  2. ak5diKUOSfgOrSgN

    • From where the knot was, start unweaving the lacing.

    • To unweave the lacing, pull it through all of the holes, until you get to the next section.

    • The lacing is hard to pull through the glove and requires quite a bit of manpower.

    • The first section continues up until the pocket.

  3. 1coXESdHap3klRrh
    1coXESdHap3klRrh
    hYWiUfDlpFhvBbwR
    hDAAj6KAJ1mFKFqs

    • This section is difficult to unlace and may need the assistance of a tool to get it lose. We have used the unlacing/lacing tool that came with the our kit.

    • This is the pocket section.

  4. wZtKhv1c6F5EYrXI
    wZtKhv1c6F5EYrXI
    d5vM5eGZj63RJKjK
    lMvVCQVkhyl46IOV

    • Trace along the pocket and when you come to the end untie the knot.

    • We have now unlaced all of the glove.

  5. 5BGVqxEOhXWIR4IZ
    5BGVqxEOhXWIR4IZ
    SeKltQQwV6VpNcaV
    TMHmDZCCkdF6Mi4C

    • Start by weaving the lace through the lacing tool as shown.

    • Weave through spot A and then tie a knot.

    • Weave the lace through the pattern shown

  6. mnyDgHtlH62nomss
    mnyDgHtlH62nomss
    5UBDjcIdM2Irjrs1
    ycp1cRXWUYDwLg6b

    • Weave the lace through spot B.

    • Follow the pattern shown and tie a knot at spot C.

    • Make sure to pull this section tighter than the rest.

    • Cut off the extra lace.

    • We have now used the first length of lace.

  7. kmQGVM2j5JMlXmDm
    kmQGVM2j5JMlXmDm
    m5XF6vCGwh2cICEP
    Rp3yjQbTXVIPUNBB

    • Weave through spot D and then tie a knot.

    • Follow the pattern shown.

  8. MXMDURMZbycUxlWH
    MXMDURMZbycUxlWH
    bVQXxESjDhJrmbAs
    xVr3ex5ycLTmpEMc

    • Tie a knot at spot E and cut off the left over lace.

    • We will be using this lace in the next step.

  9. YG1wsgXvWIGrEVIg
    YG1wsgXvWIGrEVIg
    KMwLBaGDvOWMoSP6
    KXkULmYHXDmthZKX

    • Weave through spot F and tie a knot.

    • Follow the pattern shown.

    • Weave through spot G and tie a knot.

    • Spot G has another piece of lace in it but it opens up in two different spots.

  10. QXCdh4OgmfSBRF2h

    • Congratulations, you now have relaced your old baseball glove!

Conclusion

Enjoy your newly-repaired baseball glove.

Author

Chandler Torres

Member since: 08/02/17

101 Reputation

0 comments