Mitsubishi Diamondpoint NXM76LCD Motherboard Replacement

Written By: Padraic Hoselton
  • Comments: 0
Mitsubishi Diamondpoint NXM76LCD Motherboard Replacement

Difficulty

Moderate

Steps

8

Time Required

5 - 25 minutes

Introduction

  1. lWYbCNkb3wlNSCRR
    lWYbCNkb3wlNSCRR
    LeX5jnJbOqNTDHAs
    QmRXQNJaOyb5Crh4

    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. W4JsWwQQPiveiNrL

    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. sKDMolHvjJsyg4bX
    sKDMolHvjJsyg4bX
    DFWf35KTu1uZ2EFB
    BRNGBwFlN4PSQ3Ff

    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. pcpdxKIfYrqUkFTT
    pcpdxKIfYrqUkFTT
    A2jBIsDjxClRuoeS

    • Remove the four 5mm nut screws.

  5. r5r5VBnFWFhQVQCT
    r5r5VBnFWFhQVQCT
    UETtc53LCyrpwQX6

    • Remove the seven Phillips #1 screws.

  6. 2CLHKWGJdtO1OB4c
    2CLHKWGJdtO1OB4c
    rTf1KllqiLrTJHrO
    i2cPvOvxnhtJoYXD

    • Remove all the cables.

  7. A1Y6WWkGCRhKoAN1
    A1Y6WWkGCRhKoAN1
    wfkTaohTMI4OHYtI
    ccOktDn2xsciO3Fy

    • Remove the four screws.

    • Pull the motherboard up and off.

  8. ZmXvVZZVhSVw6hmx

    • Now you can replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Padraic Hoselton

Member since: 23/08/17

4204 Reputation

0 comments