Minolta QTsi Maxxum Lens Replacement

Written By: Jordan Ellery
  • Comments: 0
Minolta QTsi Maxxum Lens Replacement

Difficulty

Easy

Steps

3

Time Required

10 minutes

Introduction

Replace the back piece of glass so that your pictures will be clear of scratches and cracks.

  1. xMHcLKKLcecWK3RQ
    xMHcLKKLcecWK3RQ
    fGhXi6dxPj6wlbaU

    • The lens release button is located on the right front side of the camera.

    • Remove the lens from the camera by pushing the lens release button.

  2. j4Sgvtl6ELL4EqsR

    • The detached module has multiple screws that must be removed in order to reach the lens.

    • Once detached, remove the (4) black Phillips #00 5mm screws from the outer rim of the module.

    • Next, remove the (2) remaining black Phillips #00 5mm screws.

  3. BxlLr1HByLCJVoPL
    BxlLr1HByLCJVoPL
    I6yvZm2PvIVvFpXm

    • Once all screws have been removed, take the back piece off of the lens and replace it.

    • This piece should come off easily without using any tools.

    • There is film underneath the last 2 screws that are removed so be careful when taking it out because it could rip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jordan Ellery

Member since: 10/10/16

388 Reputation

0 comments