MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement

Written By: Monica Reece
  • Comments: 0
MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement

Difficulty

Very easy

Steps

4

Time Required

5 minutes

Introduction

This repair guide will show you how to replace the batteries in the remote controller for the MerchSource the Black Series Boat Racers device. The batteries may need to be replaced if the red light indicator on the remote controller does not turn on.

  1. 1bXmHQndr1kkDh3T
    1bXmHQndr1kkDh3T
    quJykO3VDMLZePUf

    • Turn the remote control over to the back.

  2. SZxYZc6gyqLBTvlF

    • Slide the battery cover off in the direction of the arrow on the cover.

  3. EQjmhWmiviRMT4xG
    EQjmhWmiviRMT4xG
    bga3fw1g2USxvMjF

    • Remove the batteries (2 AA).

  4. ZlrR6LiXkOPWtNKn

    • Replace with new batteries, preferably of same brand to avoid possible corrosion.

    • Make sure the positive and negative ends of the batteries align with the positive and negative connections in the battery compartment.

    • Check to make sure the boat is functional. If it is not powering on, consult the troubleshooting page.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Monica Reece

Member since: 31/08/18

672 Reputation

0 comments