Makita Chain Saw EA6100PR 2017 Chain Brake Cover Replacement

Written By: Arthur Shi
  • Comments: 0
Makita Chain Saw EA6100PR 2017 Chain Brake Cover Replacement

Difficulty

Easy

Steps

5

Time Required

10 - 20 minutes

Introduction

This guide shows how to remove the chain brake cover for a Makita chainsaw.

  1. RswXmitWNAYCqStW

    • Use a 13 mm socket to remove the two nuts securing the sprocket guard plate.

  2. lyw5XWYfZrCsTgJt

    • Remove the sprocket guard plate.

  3. it21jPSJ3WBYBNKr

    • If the chainsaw has a chain and guide bar installed, follow the manufacturer's instructions and remove them before proceeding.

    • During reassembly, if you are reinstalling the chain and guide bar, follow the manufacturers instructions on proper chain tensioning techniques.

  4. AqVSvoeFYV5vX3GZ

    • Remove the four 12 mm long T27 screws securing the chain brake cover.

  5. IB5X4sIPOTNNiUCd

    • Remove the chain brake cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 03/01/18

263396 Reputation

0 comments